Applicare APM Deployment: Infrastructure Pre-requisites for Production monitoring

Check this against your version

This article was last updated on Dec 19, 2025, before Applicare 10.0 was released (Jun 19, 2026), and has not been re-checked for Applicare 10.0. Confirm the steps in your environment or contact Support.

Applicare requires a two-machine deployment setup for security and performance:

  • Applicare Controller: This machine hosts the Applicare controller.
  • Database Server: This machine hosts the Applicare controller data store.

Security: Only the Applicare Controller is permitted to connect to the Database Server. All Agents communicate exclusively with the Applicare Controller, preventing direct agent-to-database connections and enhancing system security.

Hardware & Software requirements for Applicare Controller machine:

Applicare installerDownloadable from the Applicare support site.
Disk Space100GB SSD
RAM32 GB
CPUIntel i7 6-core equivalent or higher
JavaJava 25 or any supported version
OSWindows 10 or later / Windows Server 2012 or newer.
(OR)
Red Hat Enterprise Linux 6.x or newer (RHEL 8 recommended).
PermissionLogin user must have administrative (Windows) or root/sudo (Linux) privileges.
Web BrowserGoogle Chrome (stable version recommended for Windows)

Hardware & Software requirements for Applicare database machine:

MysqlMySQL Server 8.0
Disk Space1 TB SSD or higher (Critical: Higher capacity recommended for production monitoring).
RAM64 GB or higher.
CPUIntel i7 6-core equivalent or higher.
Supported OSWindows 10 or later / Windows Server 2012 or newer.
(OR)
Red Hat Enterprise Linux 6.x or newer (RHEL 8 recommended).
PermissionLogin user must have administrative (Windows) or root/sudo (Linux) privileges.

Port and Network Requirements

  • Agent to Applicare Controller: Agents must be able to reach the Applicare Controller's IP and Port.
    • Default Port: 8880 (Can be modified).
    • The Controller's VM IP address must be accessible to all agents.
  • Applicare Controller to Database Server: The Applicare Controller must be able to reach the Database Server's IP and Port.
    • Default Port: 3306 (MySQL default).

Note: The existing hardware requirements may undergo changes in the future. The addition of new agents or features could lead to revisions in the hardware requirements.

Was this article helpful?

Votes and follows are kept by Zendesk, so they need a Help Center account. These buttons open this article there.

Opens Zendesk · needs internet and sign-in

Still stuck? Contact support